Build failed in Hudson: 3.HEAD-amd64-CentOS-5.3 #661

From: <noc_at_squid-cache.org>
Date: Mon, 19 Jul 2010 19:02:09 +0200 (CEST)

See <http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/661/changes>

Changes:

[Alex Rousskov <rousskov_at_measurement-factory.com>] More AsyncJob rules based on squid-dev reviews:

- You must implement start() and doneAll() methods.
- In doneAll(), always call doneAll() of the parent.

[Alex Rousskov <rousskov_at_measurement-factory.com>] Polished job start documentation.

[Amos Jeffries <amosjeffries_at_squid-cache.org>] Make --disable-loadable-modules work again

------------------------------------------
Started by an SCM change
Building on master
[workspace] $ bzr log --show-ids -r -1
[workspace] $ bzr pull --overwrite http://bzr.squid-cache.org/bzr/squid3/trunk/
http://bzr.squid-cache.org/bzr/squid3/trunk is permanently redirected to http://bzr.squid-cache.org/bzr/squid3/trunk/
 M src/base/AsyncJobs.dox
All changes applied successfully.
Now on revision 10647.
[workspace] $ bzr log --show-ids -r -1
[workspace] $ bzr log -v -r revid:amosjeffries_at_squid-cache.org-20100719131517-9tw764iy31np31po..revid:rousskov_at_measurement-factory.com-20100719161025-ix6eui5dtr2yu66m --long --show-ids
[workspace] $ /bin/sh -xe /tmp/hudson5932029140787194196.sh
+ ./test-builds.sh --verbose --use-config-cache
TESTING: layer-00-bootstrap
total 8
drwxr-xr-x 2 hudson hudson 4096 Jul 19 19:01 .
drwxr-xr-x 26 hudson hudson 4096 Jul 19 19:01 ..
BUILD: .././test-suite/buildtests/layer-00-bootstrap.opts
automake (1.9) : automake
autoconf (2.61) : autoconf
libtool (1.5) : libtool
Bootstrapping
compat/Makefile.am:12: Libtool library used but `LIBTOOL' is undefined
compat/Makefile.am:12:
compat/Makefile.am:12: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL'
compat/Makefile.am:12: to `configure.in' and run `aclocal' and `autoconf' again.
src/Makefile.am:153: Libtool library used but `LIBTOOL' is undefined
src/Makefile.am:153:
src/Makefile.am:153: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL'
src/Makefile.am:153: to `configure.in' and run `aclocal' and `autoconf' again.
src/acl/Makefile.am:4: Libtool library used but `LIBTOOL' is undefined
src/acl/Makefile.am:4:
src/acl/Makefile.am:4: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL'
src/acl/Makefile.am:4: to `configure.in' and run `aclocal' and `autoconf' again.
src/adaptation/Makefile.am:15: Libtool library used but `LIBTOOL' is undefined
src/adaptation/Makefile.am:15:
src/adaptation/Makefile.am:15: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL'
src/adaptation/Makefile.am:15: to `configure.in' and run `aclocal' and `autoconf' again.
src/adaptation/ecap/Makefile.am:4: Libtool library used but `LIBTOOL' is undefined
src/adaptation/ecap/Makefile.am:4:
src/adaptation/ecap/Makefile.am:4: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL'
src/adaptation/ecap/Makefile.am:4: to `configure.in' and run `aclocal' and `autoconf' again.
src/adaptation/icap/Makefile.am:4: Libtool library used but `LIBTOOL' is undefined
src/adaptation/icap/Makefile.am:4:
src/adaptation/icap/Makefile.am:4: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL'
src/adaptation/icap/Makefile.am:4: to `configure.in' and run `aclocal' and `autoconf' again.
src/auth/Makefile.am:7: Libtool library used but `LIBTOOL' is undefined
src/auth/Makefile.am:7:
src/auth/Makefile.am:7: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL'
src/auth/Makefile.am:7: to `configure.in' and run `aclocal' and `autoconf' again.
src/base/Makefile.am:5: Libtool library used but `LIBTOOL' is undefined
src/base/Makefile.am:5:
src/base/Makefile.am:5: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL'
src/base/Makefile.am:5: to `configure.in' and run `aclocal' and `autoconf' again.
src/comm/Makefile.am:4: Libtool library used but `LIBTOOL' is undefined
src/comm/Makefile.am:4:
src/comm/Makefile.am:4: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL'
src/comm/Makefile.am:4: to `configure.in' and run `aclocal' and `autoconf' again.
src/esi/Makefile.am:4: Libtool library used but `LIBTOOL' is undefined
src/esi/Makefile.am:4:
src/esi/Makefile.am:4: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL'
src/esi/Makefile.am:4: to `configure.in' and run `aclocal' and `autoconf' again.
src/eui/Makefile.am:4: Libtool library used but `LIBTOOL' is undefined
src/eui/Makefile.am:4:
src/eui/Makefile.am:4: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL'
src/eui/Makefile.am:4: to `configure.in' and run `aclocal' and `autoconf' again.
src/fs/Makefile.am:3: Libtool library used but `LIBTOOL' is undefined
src/fs/Makefile.am:3:
src/fs/Makefile.am:3: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL'
src/fs/Makefile.am:3: to `configure.in' and run `aclocal' and `autoconf' again.
src/icmp/Makefile.am:25: Libtool library used but `LIBTOOL' is undefined
src/icmp/Makefile.am:25:
src/icmp/Makefile.am:25: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL'
src/icmp/Makefile.am:25: to `configure.in' and run `aclocal' and `autoconf' again.
src/ident/Makefile.am:4: Libtool library used but `LIBTOOL' is undefined
src/ident/Makefile.am:4:
src/ident/Makefile.am:4: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL'
src/ident/Makefile.am:4: to `configure.in' and run `aclocal' and `autoconf' again.
src/ip/Makefile.am:4: Libtool library used but `LIBTOOL' is undefined
src/ip/Makefile.am:4:
src/ip/Makefile.am:4: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL'
src/ip/Makefile.am:4: to `configure.in' and run `aclocal' and `autoconf' again.
src/ipc/Makefile.am:4: Libtool library used but `LIBTOOL' is undefined
src/ipc/Makefile.am:4:
src/ipc/Makefile.am:4: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL'
src/ipc/Makefile.am:4: to `configure.in' and run `aclocal' and `autoconf' again.
src/log/Makefile.am:4: Libtool library used but `LIBTOOL' is undefined
src/log/Makefile.am:4:
src/log/Makefile.am:4: The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL'
src/log/Makefile.am:4: to `configure.in' and run `aclocal' and `autoconf' again.
automake failed
Autotool bootstrapping failed. You will need to investigate and correct
before you can develop on this source tree
buildtest.sh result is 1
BUILD: .././test-suite/buildtests/layer-00-bootstrap.opts
Build FAILED.
Received on Mon Jul 19 2010 - 17:02:11 MDT

This archive was generated by hypermail 2.2.0 : Tue Jul 20 2010 - 12:00:09 MDT