RE: [squid-users] Peer Caches between Squid 2.5.STABLE9 and 2.4STABLE7 giving trouble

From: Babs <arvbab@dont-contact.us>
Date: Tue, 12 Jul 2005 07:22:02 -0700 (PDT)

Thanx for that correction but the problem what I
mentioned is still existing. I have gone back to
STABLE8 on the sibling and thats working fine as I
tested it.
Thanx a lot

--- Chris Robertson <crobertson@gci.com> wrote:

> > -----Original Message-----
> > From: Babs [mailto:arvbab@yahoo.com]
> > Sent: Tuesday, July 05, 2005 9:41 PM
> > To: squid-users@squid-cache.org
> > Subject: [squid-users] Peer Caches between Squid
> 2.5.STABLE9 and
> > 2.4STABLE7 giving trouble
> >
> >
> > Hi all,
> > I got a parent cache running 2.4STABLE7 on RH8.0.
> I am
> > making a sibling cache for it on FC4 with Squid
> > 2.5.STABLE9. I have used the cache_peer directive
> in
> > the sibling squid.conf to access the net through
> > parent proxy, but I am getting request timeouts
> when I
> > browse through the sibling proxy. This is puzzling
> me
> > bcoz I got another sibling running FC3 with squid
> > 2.5.STABLE8 and it is working without any
> problem.(btw
> > this FC3 box is going to be replaced with a better
> > hardware).I have checked everything to make sure I
> > didnt configured anything wrong.
> >
> > the cache_peer directive on the working FC3
> sibling as
> > follows
> >
> > cache_peer 172.16.5.2 parent 3128 0 no_query
> > default
>
> Are you sure that's what is actually there
> (no_query)? See below.
>
> >
> > This is working perfectly fine
> >
> > my cache_peer directive on the new FC4 sibling as
> > follows
> > cache_peer 172.16.5.2 parent 3128 0 default
> >
> > and this is giving me timeouts
> >
>
> The FC4 box is trying to use ICP queries on port 0,
> not getting a response and returning time out
> errors.
>
> > Btw when I configured the new FC4 box with the
> > "cache_peer 172.16.5.2 parent 3128 0 no_query
> > default" statement this gave me error and squid
> > refused to start until I removed the "no_query"
> > statement out of it.
>
> That is likely because the directive you want is
> no-query (notice the hyphen instead of the
> underscore).
>
> >
> > Someone pls tell me what may be went wrong , why
> this
> > problem is happening
> >
> > Thanx a lot
>
> Hope that helps,
>
> Chris
>

                
__________________________________
Yahoo! Mail
Stay connected, organized, and protected. Take the tour:
http://tour.mail.yahoo.com/mailtour.html
Received on Tue Jul 12 2005 - 08:22:07 MDT

This archive was generated by hypermail pre-2.1.9 : Mon Aug 01 2005 - 12:00:02 MDT