[squid-users] RE: Re[squid-users] d Hat 5 - Squid 2.6 Stable 13 WCCP V2 and GRE

Just for everyone's future reference, I found the problem with my setup.
There was a Barracuda Networks webfilter located between our Cisco ASA5520
and the Squid box. Even though Barracuda claims the webfilter should work
fine with Squid, it broke my Squid/WCCP setup. In their defense, it does
work fine with an inline Squid Proxy server, but doesn't like the WCCP
setup.

domboy wrote:
>
> Hello. I'm am having the exact same problem as described by Kevin, and got
> to the end of this thread and I've tried all the things suggested. In
> addition, I've tried it on both openSuse 10.3 (kernel 2.6.18.8-0.7-bigsmp)
> and Debian 4 (kernel 2.6.18-4) and finally Novell Suse Linux Enterprise
> Server 10 SP1 (kernel 2.6.16.54-0.2.3-bigsmp), all with the same issue. Is
> there anything else to try??
> Also, in the last post, it was recommended to assign a real IP address to
> the gre tunnel... most of the examples I've read assign the IP address
> eth0 uses to the gre tunnel as well. Is this correct?
> Any help would be greatly appreciated.
>
> Dom
>
>
>

-- 
View this message in context: http://www.nabble.com/Red-Hat-5---Squid-2.6-Stable-13-WCCP-V2-and-GRE-tp11040402p17536191.html
Sent from the Squid - Users mailing list archive at Nabble.com.